Specifications

Model No. 550
► Manually loaded, manually operated feed.
Strip length fine-adjusted with set screw at front of machine.
► Maximum strip length of .187” (using standard .125” gage block)
► Optional strip lengths up to .400” with modifications.*
► Powered by ½ horse-power motor, 110 or 220 VAC., Dual Spindle.
► Weight approximately 38 lbs.
► Minimum center line bend radius for 180º bend of .141” diameter cable is .475”
Model No. 199
► Manually loaded automatic feed; controls front-mounted.
► Feed cycle time, 10.2 seconds.
► Strip length selected by changing precision-ground gage blocks.
► Maximum strip length .187” (using standard items)
► Optional strip length up to .450” with modifications.*
► Powered by ½ horse-power motor, 110 or 220 VAC.
► Weight approximately 50 lbs.
► Minimum center line bend radius for 180º bend of .141” diameter cable is .350”
► Second spindle negates stripping / pointing changeover.
*Recommended strip length not to exceed .187” for cables larger than .141” diameter

Accessories

► Included with all accustrip machines are the following set-up tools:

19919 - Spindle Lock Wrench
19925 - Cutter Ejector
Vaco #5-16 - 1/2" Nut Driver
Vaco #90900 - Allen Key Set

► The following Basic Group accessories are available on order:

19921A-(*) Guide Bushings
19923 Strip Length Gage Block**
19927-(*) Stripping Cutter
19930 Knipper Tool
19935 Knipper Cable Support
19950 Quick-clamp Lever
19952 Quick-clamp Jaws for SMA connector
19969-(*) SMA Stripping Cutter
19971 Guide Bushing for Quick-clamp
19972 Knipper Cable support for SMA connector
19973-(*) Knipper Tool Blades
19974 Chip Collector
19981-(*) Quick Clamp Jaws

*See Accessories.pdf